STATUS RAIL MOUNT TEMPERATURE TRANSMITTERS

Status SEM213P

Status SEM213P Temperature Transmitter (click here for more info)

The SEM213/P is a cost effective DIN rail mount temperature transmitter that accepts RTD temperature probes and converts the probe output to the industry standard (4 to 20) mA transmission signal.

A simple push button operation allows the user to select RTD type, Burnout direction, Select fixed ranges and trim 4 and 20 mA points.

The SEM213P transmitter incorporates the latest digital technology to ensure accurate drift free performance.

If required the desired range can be specified at the time of order, removing the need for user configuration. If the range is not specified then the transmitter will be supplied at the default range of (0 to 100) °C type Pt100 IEC.

 

  • Inputs: Pt100 (3 Types), Ni100, Ni120, Cu100, Ohms (10 To 400_)
  • Push Button Configuration
  • Advanced User Config For Access To 7 Pre Set Temperature Ranges
  • LED sensor fail indication
  •  

    Status SEM213TC

     

    Status SEM213TC Temperature Transmitter (click here for more info)

    The SEM213/TC is a DIN rail mount temperature transmitter that accepts thermocouple temperature probes and converts the probe output to the industry standard (4 to 20) mA transmission signal.

    A simple push button operation allows the user to select TC type, Burnout direction, Select fixed ranges and trim 4 and 20 mA points. The SEM213TC transmitter incorporates the latest digital technology to ensure accurate drift free performance.

    If required the desired range can be specified at the time of order, removing the need for user configuration. If the range is not specified then the transmitter will be supplied at the default range of (0 to 1000) °C type K.

     

  • K, J, N, E, T, R, S Thermocouples Plus mV Input
  • Button Configuration
  • Advanced User Config for Access to 7 Pre Set Temperature Ranges
  • Galvanic Isolation
  •  

    Status SEM1610

    Status SEM1610 Temperature Transmitter (click here for more info)

    The SEM1610 is a programmable DIN rail mounted temperature transmitter which accepts RTD, Thermocouple, mV and passive current signals converts them into the industry standard 4 to 20mA transmission signal.

    Designed for ease of use, our direct USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1610 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1610 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. 

     

  • Pt100,Thermocouple, mV, mA Input
  • Direct USB Port Configuration
  • Galvanic Isolation
  • 4/20mA two wire Output
  • Status SEM315

    Status SEM315 Temperature Transmitter (click here for more info)

    The SEM315 is a DIN Rail temperature transmitter with HART Protocol. It accepts RTD, Thermocouple, mV and slidewire sensors.

     

    The SEM315 has full HART communications protocol which allows the user to quickly and easily down-load information or interrogate the device enabling the following:-

    • Simple re-ranging of sensor type and range
    • Easy on site re-calibration
    • Self documentation
    • Operation with proprietary software packages such as AMS Plant Web™ and Cornerstone™
    • Remote configuration on the (4 to 20) mA loop with a hand held communicator or with a PC & HART modem
    • Online Digital communication concurrent with a (4 to 20) mA Analogue signal.

    All the standard HART universal and common usage commands are fully implemented, with other device specific commands that enable access to the enhanced performance parameters of the SEM315.

     

  • RTD, Thermocouple, mV and Potentiometer Input
  • HART® Protocol
  • User Linearization
  • Sensor Burnout Detect
  • Galvanic Isolation
  •