STATUS INSTRUMENTS CONVERTERS

Status SEM1000

 

Status SEM1000 loop isolator (click here for more info)

The SEM1000 loop isolator is an ideal solution to overcome ground loops. Designed to be series connected into a new or existing (4 to 20) mA current loop and provide an isolated (4 to 20) mA signal capable of driving into 300 ohm. The output is powered from the input loop.

 

  • Ground Loop Isolator
  • Output powered from the input loop
  • High Accuracy
  • Galvanic Isolation
  • High Reliability
  • status sem1200

    Status SEM1200 loop splitter (click here for more info)

    The SEM1200 is a current loop splitter that provides two isolated (4 to 20) mA passive outputs from a single passive (4 to 20) mA input.The output loops must be powered externally.

    It is housed in a 12.5mm wide DIN rail mount plastic enclosure with screw terminals for wiring.

  • Provides 2 isolated (4 to 20) mA outputs from 1 (4 to 20) mA input
  • High Accuracy
  • Galvanic Isolation
  • 12.5 mm Wide
  • Status SEM1610

     

    Status SEM1610 Temperature Transmitter/ Converter (click here for more info)

    The SEM1610 is a programmable DIN rail mounted temperature transmitter which accepts RTD, Thermocouple, mV and passive current signals converts them into the industry standard 4 to 20mA transmission signal.

    Designed for ease of use, our direct USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1610 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1610 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. 

     

  • Pt100,Thermocouple, mV, mA Input
  •  

  • Direct USB Port Configuration
  • Galvanic Isolation
  • 4/20mA two wire Output
  • status SEM1620

     

     Status SEM1620 converter Voltage output (click here for more info)

    The SEM1620 signal conditioner provides a 3 wire isolated voltage output signal and accepts RTD, Thermocouple, mV and passive current sensor inputs. It  has been designed to accept most common process and temperature sensor inputs and provide the user with a three wire voltage output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature.

     

    Designed for ease of use, our direct USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1620 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make.

  • Pt100,Thermocouple,mV,mA Input
  •  

  • (0 to 10), (0 to 5), (2 to 10), (1 to 5) and ( 0 to 1)V DC Output choices
  • Push Button User Trim For In Process Fine Tuning
  • Galvanic Isolation
  • Status SEM1630

    Status SEM1630 Dual relay trip ouput (click here for more info) 

    The SEM1630 is a DIN rail mounted trip amplifier which accepts RTD, Thermocouple, mV and passive current signals and provides a dual trip output. Isolation is provided on all three ports. All temperature ranges are linear to temperature.

    Designed for ease of use, our USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1630 and your PC and you’re ready to go. Using our free configuration software, your PC will automatically read the current configuration data and guide you through any changes you wish to make. To further help save time, the SEM1630 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC. 

     

  • Pt100,Thermocouple,mV,mA Input
  • Dual Relay Outputs 250V AC @ 1A
  • Relay Contacts isolated from each other
  • Galvanic Isolation
  • Simple USB Configuration Port
  • Status SEM1700

    Status SEM1700 Universal Converter/Isolator (click here for more info)

    The SEM1700 is a  DIN rail mounted universal signal conditioner. It accepts RTD, Thermocouple, Voltage, Current and Potentiometer sensor inputs and provides the user with a programmable current or voltage output signal plus dual trip relays. Isolation is provided between input, outputs and supply. All temperature ranges are linear to temperature. Both input and output loop excitation is provided as well as a fully universal power supply.

    Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1700 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. To further help save time, the SEM1700 does not need to be wired to a power supply during the configuration process, it is powered via the USB interface from your PC.

  • Rtd, Thermocouple, mV, V, mA and Potentiometer Input
  • Isolated Universal Voltage or Current Output
  • Dual C/O Relay Trip Outputs
  • Universal Power Requirement 22to 250V AC or DC
  • Powers both input and output current loops
  • Simple Configuration Via USB Port
  • Status SEM1750

    Status Dual Channel Converter/Isolator (click here for more info)

    The SEM1750 is a cost effective dual channel signal conditioner that accepts a bipolar voltage or current signal and isolates to provide ranged industrial process output signals such as (0 to 20) mA, (4 to 20) mA, (0 to 10) V, (1 to 5) V DC. In fact, any signal output can be programmed within the output range limits.
    The SEM1750 is configured using our easy to use configuration software, USB Speed Link. It offers the user two levels of configuration, a basic current/voltage signal converter were the device can be set as dual channel signal isolator / convertor or signal splitter. For more advanced applications, a configuration menu offering a wide range of user set functions, including process scaling and profiling, maths functions, signal damping, sensor linearisation and signal preset for diagnostics purposes.

     

  • Dual Channel Voltage Or Current (Active/Passive)Inputs and Outputs
  • 5 Port Isolation To 3.75Kv
  • Can Be Configured As An Active Signal Splitter
  • User Selectable Maths Functions On Each Output Channel
  • Signal Linearisation
  • Signal Simulate Function For Diagnostics
  •